65cc 3.4KW Gas Chainsaw,24-Inch Guide Bar,2-Stroke Gas Powered Chain Saw for Wood Cutting, Logging,Pruning & Farm Use,High Power with Manganese Steel Chain,Easy Start & Low Vibration
𝟐𝟒-𝐈𝐍𝐂𝐇 𝐆𝐔𝐈𝐃𝐄 𝐁𝐀𝐑 𝐅𝐎𝐑 𝐇𝐄𝐀𝐕𝐘 𝐃𝐔𝐓𝐘: Features a hardened,
-
Detail
Using traditional axes to cut wood is inefficient and very tiring. And our 2-stroke gasoline-powered chainsaw with 3.4KW strong power and 65cc displacement is an ideal choice for you to cut wood with less effort, and it is easy to assemble&operate.Having it makes your work easier and simpler.
Details
- Guide Bar Cover: It allows for convenient storage of the guide bar when not in use and protects it well.
- Tool Bag: You can put the equipped tools into the tool bag to avoid losing them while protecting the tools well to extend their service life.
- Fuel Tanks: The 26oz fuel tank, 14oz chain fuel tank, and equipped translucent mixing pot allow for large capacity, a convenient mixture of fuels, and long-term use without frequent filling.
- Convenient Tensioner: It ensures accurate and convenient adjustment of the chain tension.
Application
It is suitable for forest harvesting, cutting wood, pruning branches, gardening, home woodworking, bamboo sawing, logging, light felling, DIY crafts, ranches, farms, and so on to meet different needs
Starting Method:
1. Fill fuel and chain oil tanks respectively,and tighten the caps securely.
2. Put the switch to "I" position
3. While holding the throttle lever together with the throttle interlock, push in the side throttle lock button and release the throttle lever to hold it at the starting position.
4. Pull out the choke knob to the closed position.
5. While holding the saw unit securely on the ground,pull the starter rope vigorously.
6. When engine has ignited first ,push in the choke knob and pull the starter again to start the engine
7. Allow the engine to warm up with the throttle lever pulled slightly.
How to Assemble the Chainsaw:
1. Pull the guard towards the front handle to check that the chain brake is not on.
2.Loosen the nuts and remove the chain cover.
3. Install the attached spike to the power unit.
4. Gear the chain to the sprocket and, while fitting the saw chain around the guide bar, mount the guide bar to the power unit. Adjust the position of chain tensioner nut on the chain cover to the lower hole of guide bar.
Specification
- Material: Manganese Steel, Rubber
- Power Type: Gasoline
- Color: Orange
- Process: Quenching
- Assembly Required: Yes
- Power Source: Gas Powered
- Ignition System: Hand Pull Start
- Engine Type: Single Cylinder, Air-cooled, 2-Stroke
- Oil Mixture: 25:1(Gasoline: Oil)
- Chain Length: 60.96cm/24inch
- Displacement: 65cc
- Tank Capacity: 0.77L/26oz
- Speed: 2700rpm
- Chain Fuel Tank Capacity: 0.42L/14oz
- Power: 3.4kw
- Maximum Cutting Diameter: 58cm/28.33in
- Net Weight: 8.5kg/18.74 1bs
- Gross Weight: 9kg/19.841bs
- Package Size: 56*26*38cm/22.05*10.24*14.96in
- Product Size: 104*27*33cm/40.94*10.62*12.99in
Package Included
1x Gas Chainsaw
1 Pair x Goggles
1 Pair x Gloves
1x Funnel
1x Guide Bar
1x Guide Bar Cover
1x Chain
1x Mixing Pot
1x English Manual
All Accessories for Assembly
Notes:
1. Please mix gasoline with oil at the ratio of 25:1. The oil mixing ratio should not be incorrect or biased. The chain oil tank must not be short of oil. Do not use inferior engine oil as a matching oil or chain lubricant.
2. Please perform necessary maintenance, dust cleaning, oil injection, etc. after each work.
3. Before using the chain saw, apply engine oil to the air filter to ensure the normal use of the machine.
4. Please read the English manual completely before installing. And pay particular attention to the safety instructions included.
-
Customer ReviewsNo comments